Nosmai Studio Colour and LUTs
Nosmai Studio / Guides / Colour and LUTs
Updated October 6, 2026

Add a colour layer in Nosmai Studio to grade the whole frame with a .cube LUT or a full-frame effect. A LUT gives a filter a film look or a branded colour in one step; a full-frame effect adds grain, glow, or a vignette. Colour layers apply over everything the camera sees.

Overview

A colour layer grades the whole frame. A Colour LUT applies a .cube lookup table (a film look or a branded colour); a full-frame effect adds grain, glow, or a vignette. Both apply over the whole picture.

Product: Nosmai Studio · Platform: macOS, Windows · Updated: 6 October 2026 · Reading time: 6 minutes

Prerequisites

  • A project open in the editor.
  • For a LUT, a .cube file (or a LUT image).

Add a colour LUT

  1. In the Layers panel, press +, then choose Colour LUT under The whole picture.
  2. Pick the .cube file, or add the layer and choose it in the inspector.
  3. Select the layer to open its inspector.

Set it up

The LUT inspector has:

  • Table: the .cube file in use.
  • Strength: how strongly the LUT applies, 0.0 to 1.0. Lower it for a subtle grade.
  • On: turn the LUT on or off.

A LUT attached as a chain pass also has an Applies to control (which regions it affects) and runs after the 3D stage.

Full-frame effects

A full-frame effect adds grain, glow, or a vignette over the frame. Add it the same way, under The whole picture.

What is planned

Brightness, contrast, warmth, a colour-punch control, and a built-in preset library are planned and are shown as not yet available. For now, grade with a .cube LUT and its strength.

Verify it worked

  • The whole frame takes on the LUT's colour in the preview.
  • Lowering the strength blends the graded look back toward the original.
  • Turning the layer off restores the ungraded frame.

Common problems

What you seeWhyFix
The grade is too strongStrength is at or near 1.0Lower the strength until it looks right
The LUT did not loadThe file is not a valid .cube or LUT imageRe-export the LUT as a standard .cube and re-import
Brightness or contrast controls are missingThose are planned and not in this versionGrade with the LUT's strength, or bake the adjustment into the LUT
The "Applies to" list is disabledThe filter has no segmentation for region maskingAdd a background layer, which provides segmentation, or apply the LUT to the whole frame

Next steps

Reference

Nosmai

An AR and AI company. Founded on the idea that the next decade of software will be visual, and that the tools for it should be within reach of anyone building.

Newsletter

Product updates and release notes. No spam.

© 2026 nosmai, inc · all rights reserved